HP Designjet T1300 ePrinter - Manual (Page 52)

11. If the leading edge of the paper has no barcode, the front panel prompts you to select the paper
category and type.
TIP: If you have loaded a paper type whose name does not appear in the paper list, see The
paper type is not in the driver on page 154 .
12. If the Printing paper info option is enabled, the front panel may ask you to specify the length
of the roll. See Printing paper info on page 47 .
13. The printer checks the alignment and measures the width, then the front panel prompts you to
close the roll cover.
If the roll is not correctly aligned, follow the instructions on the front-panel display.
NOTE: If you have an unexpected issue at any stage of the paper loading process, see The paper
cannot be loaded successfully on page 152 .
Unload a roll
Before unloading a roll, check whether there is paper on the roll or if the roll is out of paper, and follow
the appropriate procedure as described below.
Quick procedure with paper on the roll
If there is paper on the roll, just open the roll cover, and the roll is unloaded automatically.
NOTE: When the roll is unloaded in this way, no barcode is printed on it, so the printer will not know
the length of the roll when it is next loaded. See Printing paper info on page 47 .
NOTE: If you open the cover of roll 1 while a sheet is loaded, the sheet is also unloaded.
Front panel procedure with paper on the roll
If there is paper on the roll, you can unload it from the front panel.
1. Press , then the roll icon, then Unload.
Alternatively, press , then , then Paper > Paper unload > Unload roll 1 or
Unload roll 2.
2. You may need to open the roll cover.
Roll out of paper procedure
If the end of the paper is no longer attached to the core, use the following procedure.
1. If you have already started the unload process, press on the front panel to cancel that
procedure.
2. Lift the blue lever on the left. If the front panel displays a warning about the lever, ignore it.
3. Pull out the paper from the printer. Pull from wherever the paper is accessible; the back of the
printer is recommended. You may need to open the roll cover.
4. Lower the blue lever.
44 Chapter 5 Paper handling ENWW