HP Deskjet Ink Advantage D730 Printer - Manual (Page 59)

3. Repeat this process until no ink residue or dust appears on the swab.
4. Insert the print cartridges in the HP Deskjet, and then close the cover. For more
information, see Replace print cartridges .
Maintain print cartridges
Follow these guidelines to maintain and store HP print cartridges and to ensure consistent
print quality.
•
When you remove a print cartridge from the printer, store it in an airtight plastic
container to protect your print cartridge and to prevent the ink from drying out.
• Keep all unused print cartridges in their original sealed packages until they are
needed. Store print cartridges at room temperature (15° to 35° C or 59° to 95° F).
• Do not remove the plastic tape covering the ink nozzles until you are ready to install
the print cartridge in the printer. If the plastic tape has been removed from the print
cartridge, do not attempt to reattach it. Reattaching the tape damages the print
cartridge.
CAUTION: Always turn the printer off with the Power button before you unplug the
power cord or turn off a power strip. This allows the printer to store the print cartridges
properly. When you store the printer, always leave the active print cartridges inside
the printer.
Printer Toolbox
The printer Toolbox contains a number of useful tools to enhance the performance of the
printer.
Use the printer Toolbox to perform the following tasks:
•
Align print cartridges
• Automatically clean print cartridges
• Print a test page
• View estimated ink levels
To open the printer Toolbox
1. Open the
Printer Properties dialog box .
2. Click the Features tab, and then click the Printer services button.
The Toolbox is displayed.
Printer Toolbox 57
Maintenance