Printer does not print, Verify the following, Unable to print – HP Deskjet Ink Advantage D730 Printer User Manual
Page 71
If one or both Print Cartridge Status lights are on and flashing
•
The light on the left blinks when the tri-color print cartridge (on the left) is the problem,
the light on the right blinks when the black cartridge (on the right) is the problem. For
resolving the error with the problem cartridge, see
Resolving print cartridge error
.
•
If both lights are flashing, verify that the correct print cartridges are installed. For more
information, see
.
•
If you were printing a borderless document when the light started flashing, see
Borderless printing guidelines
.
Otherwise, follow these steps:
1. Raise the printer cover, remove the print cartridge on the right, and then lower the
cover.
2. Follow one of these steps:
•
If the Power light is flashing: Open the printer cover, reinsert the print cartridge
that you removed, and then remove the other print cartridge. Proceed to step 3.
•
If the Power light is off: There is a problem with the print cartridge that you
removed. Proceed to step 3.
3.
the print cartridge.
After cleaning the print cartridge, reinsert it into the printer.
If the light continues to flash,
.
Printer does not print
If the printer does not print, check the following topics for more information:
•
•
•
If the printer still does not print
Verify the following
Verify the following conditions if the printer is not printing:
•
The printer is connected to the power source.
•
The cable connections are secure.
•
The printer is turned on.
•
The print cartridges are the correct print cartridges for the printer and are properly
installed.
For more information, see
and
•
The paper or other media is correctly loaded in the paper tray.
•
The printer cover is closed.
•
The rear access door is attached.
Unable to print
Try the following solutions:
•
Solution 1: Make sure the printer is turned on
•
Printer does not print
69
Trou
bles
ho
ot
ing