HP StorageWorks 1200 All-in-One Storage System - Manual (Page 102)

3. To select properties for the user-defined application pool:
• Select User-Defined in the content pane and then click Properties in the Actions pane.
or
• Right-click User-Defined in the content pane and select Properties.
For a user-defined application:
• Select any user-defined application in the content pane and then click Properties in the Actions
pane.
or
• Right-click any user-defined application in the content pane and select Properties.
Properties window
• General tab—Displays the user-defined application name, name of the application server that runs
the user-defined application, and the application area status:
Table 33 Operating status: User-defined application properties
Value Status indicator
Application storage is online. No alerts. OK
See the Alerts list for more information. See Table 45 on page 113 for
alert descriptions.
Warning
See the Alerts list for more information. See Table 45 on page 113 for
alert descriptions.
Critical
• Storage tab—Displays the user-defined application's storage space, including allocated space,
used space, free space, and the following storage allocation details:
Table 34 Storage tab: User-defined application properties
Value Property
Path to the file directory on the application server where the user-defined
application data is saved by the user-defined application. The file
directory is located on the volume created on the iSCSI LUN that was
exported by ASM to the application server.
Application Path
Communication protocol used to transfer data between the server that
hosts the user-defined application and your HP All-in-One Storage
System.
Protocol
Name of server that hosts the user-defined application. Application Server Host Name
Name of the volume on the application server to which the user-defined
application saves its data. The volume resides on the iSCSI LUN (logical
disk) exported by ASM to the application server.
Application Server Volume -
Name
Status of the volume on the application server where the user-defined
application data is stored. Application Server Volume -
Status
Indicates if user-defined application storage is configured with exclusive
storage. See
Table 19 on page 72 for more information.
Application Server Volume -
Exclusive Storage
Monitoring storage 102