Certificate of authenticity – HP StorageWorks 1200 All-in-One Storage System User Manual
Page 119
Advertising
To install WEBES on your storage system, run the setup executable located in the
C:\hpnas\Components\WEBES
folder.
Certificate of Authenticity
The Certificate of Authenticity (COA) label is used to:
•
Upgrade the factory-installed operating system using the Microsoft Upgrade program for license
validation.
•
Reinstall the operating system because of a failure that has permanently disabled it.
The COA label location varies by server model. On rack-mounted server models, the COA label is
located either on the front section of the right panel or on the right front corner of the top panel. On
tower models, the COA label is located toward the rear of the top panel of the server.
All-in-One Storage System
119
Advertising
This manual is related to the following products: