HP ProLiant BL490c G6 Server-Blade - Manual (Page 29)

Hardware options installation 29
7. Install the DIMM.
8. Install the DIMM baffle.
9. Connect the hard drive cables.
10. Install the access panel (on page 13 ).
11. Install the server blade (" Installing a server blade " on page 17 ).
Processor option
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
CAUTION: To prevent possible server blade overheating, always populate processor socket 2
with a processor and a heatsink or a processor socket cover and a heatsink blank.
IMPORTANT: Processor socket 1 must be populated at all times or the server blade does not
function.
IMPORTANT: When installing the heatsink, align the guide pins on the processor retention
bracket with the alignment holes in the heatsink.
To install the component:
1. Update the system ROM.
Locate and download the latest ROM version from the HP website (
http://www.hp.com/support ).
Follow the instructions on the website to update the system ROM.
2. Power down the server blade (on page 11 ).
3. Remove the server blade (on page 12 ).
4. Remove the access panel (on page 13 ).