HP OneView for VMware vCenter - Manual (Page 45)

2. Click Continue to continue the data refresh, or click Cancel to stop the refresh.
If you click Cancel when the refresh process is in a state where it is safe to cancel, the operation
is stopped. If it is not safe to cancel, the operation is cancelled as soon as it is safe to stop
the operation.
3. Optional: Move the cursor over the refresh status on any storage page to view the elapsed
time and estimated time remaining. See
Figure 17 (page 43) .
Using the Storage Administrator Portal
1. Log in to the Storage Administrator Portal.
2. Click Refresh in the top right corner of the Storage Administrator Portal.
The Storage Administrator Portal displays the options shown in Figure 20 (page 45) .
Figure 20 Manual data refresh options—Storage Administrator Portal
3. Click OK to continue the data refresh.
4. Optional: Click Check Refresh Progress to update the elapsed time and estimated time
remaining. See
Figure 18 (page 44) .
Restarting a data refresh
Restarting a data refresh stops the existing refresh process and starts a new one. If a data refresh
is in progress and changes are made that will require another refresh, use the following procedure
to start a new refresh immediately instead of waiting for the current refresh to finish.
Restarting a data refresh using HP Insight Management
1. Click the page reload icon in the top right corner of any storage page.
The HP Insight Management tab displays the options shown in Figure 19 (page 44) .
2. Click Restart.
Using the Storage Module for vCenter 45