Viewing storage information for a cluster – HP OneView for VMware vCenter User Manual
Page 51
Figure 27 Viewing datastore details
Viewing detailed information
Click the Storage Volumes, Virtual Disks, HBAs, Paths, Replications, or VMs to Volumes tab to view
detailed information about the selected host. For information about the values displayed in these
tabs, see the following:
•
“Viewing storage volumes” (page 56)
•
•
•
“Viewing associated VMs” (page 62)
Viewing storage information for a cluster
To view storage information for a cluster using the .net client:
1.
Navigate to the Hosts and Clusters Inventory view.
2.
Select a cluster in the inventory tree.
3.
Click the HP Insight Management tab.
4.
Click More in the Storage portlet.
The Storage Details page appears.
5.
Click the Summary tab.
The Summary tab displays information about HP storage and includes a graphical
representation of that information.
For details about the colors used on this page, click Show Legend. See
.
Viewing summary information
The Summary tab displays the following information about the selected cluster:
HP Storage Provisioned to Cluster
•
Volumes—Number of volumes available to the cluster from configured HP storage arrays and
whether any are thin-provisioned
•
HP Storage Provisioned—Amount of storage available to the cluster from configured HP storage
arrays
•
HP Storage Used—Amount of storage from configured HP storage arrays that is used by the
cluster
NOTE:
The HP Storage Used value can differ from the HP Storage Provisioned value if thin
provisioning or demand-allocated snapshots are used.
•
HP Storage ThP Savings—Amount of storage saved through the use of array-based thin
provisioning
•
Volumes overprovisioned—Number of over-provisioned volumes
Using the Storage Module for vCenter
51