HP 3PAR Application Software Suite for Oracle - Manual (Page 218)

MESSAGE
3PAR1316: ERROR: Could not activate volume group <group>.
REASON
The LVM vgchange command, which is used to activate the snapshot volume group, has failed.
SOLUTION
See the preceding error message to determine the cause of failure.
MESSAGE ID
1317
SYMBOLIC NAME
RMO_ERROR_VG_NOTFOUND
MESSAGE
3PAR1317: ERROR: Could not retrieve information for volume group <group>.
REASON
The LVM vgdisplay command, which is used to retrieve the snapshot volume group information,
has failed.
SOLUTION
See the preceding error message to determine the cause of failure.
MESSAGE ID
1318
SYMBOLIC NAME
RMO_ERROR_REMOVE_LV
MESSAGE
3PAR1318: ERROR: Could not remove logical volumes for volume groups <groups>.
REASON
The LVM lvremove command, which is used to remove LVM volumes from a snapshot volume
group, has failed.
SOLUTION
See the preceding error message to determine the cause of failure.
MESSAGE ID
1319
SYMBOLIC NAME
RMO_ERROR_REMOVE_PV
MESSAGE
3PAR1319: ERROR: Could not remove physical volumes for volume groups <groups>.
REASON
The LVM pvremove command, which is used to remove LVM physical volumes from a snapshot
volume group, has failed.
SOLUTION
See the preceding error message to determine the cause of failure.
MESSAGE ID
1320
SYMBOLIC NAME
218 Troubleshooting