Removing recovery manager from ibm aix systems – HP 3PAR Application Software Suite for Oracle User Manual
Page 37
2.
Enter the lslpp -l RMOra.rte command and verify:
•
The Product Fileset name RMOra.rte, State and Description are displayed.
•
The level displayed is 4.5.0.
Removing Recovery Manager from IBM AIX Systems
To remove 3PAR Recovery Manager from IBM AIX system:
1.
Log in as the root user.
2.
Insert the HP 3PAR Recovery Manager CD into a CD-ROM drive.
NOTE:
If the CD is not mounted automatically, mount it manually.
To mount the CD on physical server, enter the following:
# /usr/sbin/mount -rv cdrfs /dev/cd0 /mnt/cdrom
To mount a CD on VIO clients:
1.
Create a Virtual SCSI Adapter or use existing one on the VIO server.
2.
To create a Virtual Device cd0 and to map it to Virtual Adapter, enter the following:
# mkvdev -vdev cd0 -vadapter vhost0
vtopt0 Available
3.
The CD is available to the same client, where vhost0 is mapped.
4.
To find out to which client the CD is mapped to, enter lsmap -all on VIO Server.
5.
On VIO Client, use mount command to mount a CD.
# /usr/sbin/mount -rv cdrfs /dev/cd0 /mnt/cdrom
3.
Change to the CD-ROM drive.
# cd /mnt/cdrom/
Removing Recovery Manager from IBM AIX Systems
37