HP 2000fc Modular Smart Array - Manual (Page 49)

49
CH A P T E R 4
Configuring a System for the First Time
This chapter describes how to perform first-time configuration on the storage
system. It also describes how to perform basic storage configuration to verify that
your system is working.
This chapter includes the following topics:
■ “Setting Management Port IP Addresses Using the CLI” on page 50
■ “Configuring Your Web Browser for SMU” on page 53
■ “Logging in to SMU from a Local Management Host” on page 54
■ “Updating Firmware” on page 54
■ “Setting the Date and Time” on page 54
■ “Configuring Host Ports” on page 55
■ “Creating Virtual Disks” on page 57
■ “Mapping a Data Host to a Volume” on page 58
■ “Testing the Configuration” on page 59
■ “Logging Out of SMU” on page 59
■ “Next Steps” on page 59
For information about additional configuration and management tasks, including
changing the
manage user’s password, refer to SMU’s online help or the reference
guide.