Use the hp solution center (windows), Print with the rear manual feed slot – HP Officejet Pro K8600 Printer User Manual
Page 26
Use the HP Solution Center (Windows)
Use the HP Solution Center to change print settings, order supplies, and access the
onscreen Help.
The features available in the HP Solution Center vary depending on the devices you
have installed. The HP Solution Center is customized to show icons that are
associated with the selected device. If the selected device is not equipped with a
particular feature, then the icon for that feature does not appear in the HP Solution
Center.
If the HP Solution Center on your computer does not contain any icons, an error might
have occurred during the software installation. To correct this, use the Control Panel in
Windows to completely uninstall and reinstall the software.
Print with the rear manual feed slot
If you are printing one or just a few photos, envelopes, or sheets of paper, you can use
the rear manual feed slot and leave your regular media in the input tray.
The rear manual feed slot uses a straight paper path and is designed for printing
single sheets of thick paper (up to 280 g/m
2
) such as cardstock. For information on
media types supported by the manual feed slots, see
.
Printing from the rear manual feed slot is performed in two stages: 1) changing the
software settings, and 2) loading the media. For more information on loading the rear
manual feed slot, see
NOTE: If the duplex unit is installed and you want to print using the rear manual
feed slot, replace the duplex unit with the rear-access panel.
To change the software settings (Windows)
1. Open the printer driver.
2. Click the Paper/Quality tab.
3. Select the manual feed option from the Source is drop-down list.
4. Change any other desired settings, and then click OK.
5. Print your document.
To change the software settings (Mac OS)
1. Click File, and then click Page Setup.
2. Select the media size, and then click OK .
3. Click File, and then click Print.
4. Open the Paper Type/Quality panel.
5. In the Paper panel, select the source.
6. Change any other desired settings, and then click Print.
Chapter 3
22
Use the device