HP Compaq Integrated Smart Array Controller - Manual (Page 23)

Controller Features 1-9
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: b-ch1 Controller Features.doc Last Saved On: 8/26/99 8:09 PM
Installing the Integrated Smart Array
Controller
If you purchased the Integrated Smart Array Controller as an option for your
server, you must install the controller before performing any configuration
operations.
For additional information about installing hardware options in your server,
refer to the user documents provided on the Documentation CD provided with
your server.
CAUTION: Back up all data stored on existing drives before installing the
controller. All data stored on nonarray drives will be destroyed when the new
controller is installed.
IMPORTANT: Before installing the Integrated Smart Array Controller, update the firmware
with the latest version, available from the Compaq website
http://www.compaq.com
Use the following procedure to install the controller on the system board:
1. Back up all data stored on existing drives.
2. Put the server in Standby mode by turning off power from the power
switch.
3. Disconnect the power cord and all external devices.
4. Open the system access panel as indicated in your server’s setup and
installation guide.
5. Locate the Integrated Smart Array Controller slot on the system board.
Consult your server documentation or hood label for controller location.