HP Compaq Integrated Smart Array Controller - Manual (Page 43)

Installing the Operating System Drivers 5-3
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: f-ch5 Installing the Operating System Drivers.doc Last Saved On: 8/26/99 8:12 PM
Creating Installation Diskettes for Common
Operating Systems
Use the following general procedure to create installation diskettes with
drivers for the following operating systems:
■ Novell NetWare (driver CPQARRAY.HAM, version 2.05 or later)
■ Microsoft Windows NT and Windows 2000
■ Linux
■ SCO OpenServer 5 and UnixWare
■ IBM OS/2
NOTE: If you are using the Banyan VINES operating system, proceed to the next section
to create installation diskettes.
To install the driver, create the diskettes for your operating system. These
diskettes contain the latest drivers and documentation for using Compaq
equipment in your operating system’s environment.
Create the diskettes:
1. Run the SmartStart and Support Software CD in one of the following
ways:
G From a local CD-ROM on a workstation running Windows 95/98
NOTE: If the AutoRun function is enabled, the CD will start automatically. If AutoRun is not
enabled, browse to or type in the name of the program file on your CD-ROM drive.
G By booting the server from the CD-ROM
2. At the Compaq System Utilities screen, select the option to create
support software.
3. At the Diskette Builder screen, select the option to create support
software diskettes from the CD only.
4. Scroll through the list and select the appropriate operating system.
5. Follow the instructions for creating and labeling the diskettes.
NOTE: For Linux users, specific information pertaining to your distribution will be present
in a README file on the Linux support diskette.