HP ProLiant DL980 G7 Server - Manual (Page 23)

Multiple Database File on a Drive
HP ESO also recommends that the database files are located on a dedicated drive. If multiple
database files are found on a drive, HP ESO's recommendation for relocating them on separate
drives displays on this page.
High Availability and Disaster Recovery
Mirrored Database
If a database is configured for mirroring, additional parameters for Database Status, Read-only
Status and Mirror Status will be displayed, as shown in the figure below.
Figure 24 Mirrored Database
Table 1 Possible Database Status Values
Description Value
The database is available. Normal
The database is going through the restore process. Restoring
The database is waiting to go through the recovery process. RecoveryPending
The database is going through the recovery process. Recovering
The database is has been marked as suspect. You should check your data, and the database
might have to be restored from a backup. Suspect
The database has been taken offline. Offline
The database is in standby mode. Standby
The server on which the database resides has been shut down. Shutdown
The database is in emergency mode. EmergencyMode
The database has been automatically close. AutoClosed
The database is inaccessible. The server might be switched off or the network connection
has been interrupted. Inaccessible
Table 2 Possible Read-only Values
Description Value
The database is read-write. False
The database is read-only. True
Table 3 Possible Mirror Status Values
Description Value
The principal database is not mirrored. None
Mirroring of the principal database is supended. Suspended
Optimizations Pages 23