HP Integrity NonStop H-Series - Manual (Page 96)

SNAX/CDF
Subsystems
098571 Tandem Computers Incorporated 5–11
SNAX/CDF If you use DSNM to control the SNAX/CDF subsystem, you will find the following
information helpful. While it covers what you need to know about SNAX/CDF from
the viewpoint of operating DSNM, it is not exhaustive. For more details on the
SNAX/CDF subsystem, refer to the SNAX/CDF Configuration and Control Manual.
On the command line, SNAX/CDF is specified as SNAXCDF .
Object Types The SNAX/CDF subsystem contains the following object types: process (PROCESS),
application (APPL), cross-domain resource manager (CDRM), cross-domain resource
(CDRSC), entry (ENTRY), line (LINE), physical unit (PU), path (PATH), and
transmission group (TG). The hierarchical relationships among these objects are
shown in Figure 5-5. If you issue a command for this subsystem without specifying
the object type, the object type defaults to PROCESS.
Figure 5-5. Subsystem Object Hierarchy in the SNAX/CDF Subsystem
PROCESS
APPL CDRM ENTRY LINE PATH TG
CDRSC PU
005