HP Designjet T1200 Printer series - Manual (Page 23)

4. Open the Mac OS X HP Designjet Installer.
5. Follow the instructions on your screen.
6. The printer software is installed, including the printer driver and the HP Utility.
7. When the software has been installed, the HP Printer Setup Assistant starts automatically, to set
up a connection to your printer. Follow the instructions on your screen.
8. When you reach the Select Printer screen, look for your printer's mDNS service name (which
you noted in step 1) in the Printer Name column.
● If you find the right printer name, scroll sideways if necessary to see the Connection Type
column, and check that it shows Bonjour/Rendezvous. Then highlight that line. Otherwise,
continue searching further down the list.
● If you cannot find your printer name with a Bonjour/Rendezvous connection type, check
the box My printer is not in the list.
Click Continue.
9. Continue following the instructions on the screen. When you reach the Printer Queue Created
screen, click Quit to exit, or Create New Queue if you want to connect another printer to the
network.
10. When the HP Printer Setup Assistant has finished, you can remove the CD from the CD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the
CD.
ENWW Connect to a network (Mac OS) 15
Software installation