HP Designjet T1200 Printer series - Manual (Page 48)

3. Select Paper load.
4. Select Load sheet.
5. If a roll is already loaded, you have to wait while it is automatically unloaded. In the T1200 series
only, the roll is not unloaded, but withdrawn to the standby position, so that it can be printed on
again without reloading as soon as the sheet paper has been unloaded.
NOTE: If at any time you open a roll cover while that roll is in the standby position, the roll will
be automatically unloaded, and you will have to reload it the next time you want to print on it
(T1200 series only).
6. Select your paper category and type.
TIP: If you have loaded a paper type whose name does not appear in the paper list, see The
paper type is not in the driver on page 137 .
40 Chapter 5 Paper handling ENWW
Paper handling