HP Designjet T1200 Printer series User Manual
Page 115
If the job is currently being printed (its status is printing in the Web server), you may want to cancel it
and then delete it.
●
Using the Embedded Web Server (T1200 series only): After selecting the job, select Cancel and
then Delete.
●
Using the front panel: After selecting the job, press the
Cancel
key and then select Delete.
Reprint or copy a job in the queue (T770 HD and T1200
series only)
To reprint or make extra copies of any job in the queue, select the job in the Embedded Web Server
(T1200 series only) and click the Reprint icon, then specify the number of copies you want. The job
will be moved to the top of the queue. To make more than one print of a non-printed job in the queue
from the front panel, select the job and choose Copies, then specify the number of copies required
and press the
Select
key. This overrides any value set by your software.
NOTE:
If Rotate was On when you sent the file, every copy will be rotated.
You can reprint an already-printed job from the front panel. Select the Job management menu icon
, then select the job from the queue, then select Reprint.
NOTE:
You cannot use this method for PCL3 jobs. To reprint old jobs that are PCL3, you may be
able to use your operating system's printer spooler, if you have already set the spooler to save old
jobs. This facility depends on your operating system.
Job status messages (T770 HD and T1200 series only)
These are the possible job status messages, approximately in the order in which they may be seen:
●
Receiving: the printer is receiving the job from the computer
●
Waiting to process: the job has been received by the printer and is waiting to be rendered (for
jobs submitted through the Embedded Web Server only)
●
Processing: the printer is parsing and rendering the job
●
Preparing to print: the printer is performing writing system checks before printing the job
●
Waiting to print: the job is waiting for the print engine to become free to proceed with printing
●
Waiting for nest: the printer is set up with Nesting=On and is waiting for other jobs in order to
complete the nest and proceed with printing
●
On hold: the job was sent with the on hold for preview option and is on hold
NOTE:
Do not send a job for preview with more than 64 pages, this may cause the driver
software to crash.
NOTE:
If the printer hangs up while printing a job, and the queue facility is turned on, the
partially printed job will appear in the queue as on hold when the printer is next turned on. When
you resume the job, it will start printing at the page at which it was interrupted.
●
On hold for paper: the job can't be printed because the right paper is not loaded in the printer.
Load the required paper, see
, and click Continue to resume the job
●
On hold for accounting: the job can't be printed because the printer requires all jobs to have an
account ID: enter the account ID and then click Continue to resume the job
ENWW
Reprint or copy a job in the queue (T770 HD and T1200 series only) 107
Job queue