HP Designjet T1200 Printer series - Manual (Page 143)

15 Troubleshooting paper issues
● The paper cannot be loaded successfully
● The paper type is not in the driver
● The printer printed on the wrong paper type
● An “on hold for paper” message (T1200 series only)
● The roll paper will not advance
● The paper has jammed
● A strip stays on the output tray and generates jams
● The printer displays out of paper when paper is available
● Prints do not fall neatly into the basket
● The sheet stays in the printer when the print has been completed
● The paper is cut when the print has been completed
● The cutter does not cut well
● The roll is loose on the spindle
● Recalibrate the paper advance
ENWW 135
Paper issues