Return to default calibration – HP Designjet T1200 Printer series User Manual
Page 154
4.
Select the percentage of change from –100% to +100%. To correct light banding, decrease the
percentage.
To correct dark banding, increase the percentage.
5.
Press the
OK
key on the front panel, to save the value.
6.
Wait until the front panel displays the status screen and re-print your print.
Return to default calibration
Returning to the default calibration sets all the corrections made by the paper advance calibration to
zero. To return to the default paper advance calibration value, you must reset the calibration.
1.
From the front panel, select the Image Quality Maintenance menu icon
, then Paper
advance calibration > Reset paper advance.
2.
Wait until the front panel displays the operation has completed successfully.
146 Chapter 15 Troubleshooting paper issues
ENWW
Paper issu
es