The paper is not flat, The print is scuffed or scratched – HP Designjet T1200 Printer series User Manual
Page 162
. After alignment, you may wish to reprint your job in case the
problem has been solved.
5.
Go to the front panel and press the
View information
key to see the paper advance calibration
status. If the status is DEFAULT, you should perform paper advance calibration: see
.
If the problem persists despite all the above actions, contact your customer service representative for
further support.
The paper is not flat
If the paper does not lie flat when it comes out of the printer, but has shallow waves in it, you are
likely to see defects in the printed image, such as vertical stripes. This can happen when you use thin
paper that becomes saturated with ink.
1.
Check that the paper type you have loaded corresponds to the paper type selected in the front
panel and in your software. To check on the front panel, use the
View information
key .
2.
Try changing to a thicker paper type, such as HP Heavyweight Coated Paper or HP Super
Heavyweight Plus Matte Paper.
3.
Select a paper type that is slightly thinner than the paper you have loaded; this will persuade the
printer to use less ink. Here are some example paper types in ascending order of thickness:
Plain Paper, Coated Paper, Heavyweight Coated Paper, Super Heavyweight Plus Matte Paper.
The print is scuffed or scratched
The black ink pigment can be scuffed or scratched when touched by a finger, a pen or some other
object. This is particularly noticeable on coated paper.
Glossy paper may be extremely sensitive to the basket or to anything else that it contacts soon after
printing, depending on the amount of ink used and the environmental conditions at the time of
printing.
154 Chapter 16 Troubleshooting print-quality issues
ENWW
Print-q
u
ality issu
es