Printer software – HP Designjet T1200 Printer series User Manual
Page 17
9.
Power
key - To turn the printer off or on, it also has a light to indicate the printer's status. If the
power key light is off the printer is off. If the power key light is blinking green, the printer is
starting up. If the power key light is green on, the printer is on. If the power key light is amber on,
the printer is in standby. If the power key light is blinking amber, the printer needs attention.
10. Cancel
key - To abort a procedure or interaction.
11. Up
key - To go up in a menu or option, or to increase a value, for example when configuring the
front-panel display contrast or the IP address.
12. OK
key - To confirm an action while in a procedure or interaction. To enter in a submenu in the
menu. To select a value when given an option. If the status screen is displayed, this key takes
you to the main menu.
13. Status
light - Indicates the printer's status. If the
Status
light is solid green, the printer is ready. If
it is flashing green, the printer is busy. If it is solid amber, there is a system error. If it is flashing
amber, the printer needs attention.
To highlight an item in the front-panel display, press the
Up
or
Down
key until the item is highlighted.
To select an item in the front-panel display, first highlight it and then press the
OK
key.
When this guide shows a series of front-panel display items like this: Item1 > Item2 > Item3, it means
that you should select Item1, then select Item2, then select Item3.
Information about specific uses of the front panel can be found throughout this guide.
Printer software
The following software is provided with your printer:
●
The HP-GL/2 and HP RTL driver for Windows
●
The PCL3 raster driver for Mac OS (T770 and T1200)
●
The PostScript drivers for Windows and Mac OS (T770 PS and T1200 PS)
●
The HP Utility, see
Access the HP Utility on page 27
, allows you to:
◦
Manage the printer including color with the HP Color Center
◦
View the status of the ink cartridges, the printheads and the paper
◦
Access the HP Knowledge Center, see
◦
Update the printer's firmware, see
Update the firmware on page 125
◦
Perform calibrations and troubleshooting
◦
Manage the job queue, see
Job queue management on page 103
◦
View job accounting information, see
Retrieving printer usage information on page 109
◦
Change various printer settings (in the Settings tab) (T1200 series only)
●
The Embedded Web Server runs in the printer and enables you to use a Web browser on any
computer to check ink levels and printer status, see
Access the Embedded Web Server
.
ENWW
Printer software
9
Introduction