HP Designjet T1200 Printer series - Manual (Page 192)

Functional specifications
Table 21-1 HP 72 ink supplies
Printheads Two inks in each printhead: gray and photo black, matte black and yellow, and
magenta and cyan
Ink cartridges Cartridges containing 69 ml of ink: gray, photo black, yellow, magenta and cyan
Cartridges containing 130 ml of ink: gray, photo black, matte black, yellow,
magenta and cyan
Cartridges containing 300 ml of ink (T1200 series only): matte black only
Table 21-2 Paper sizes
Minimum Maximum
Roll width 279 mm (11 in) 610 mm (24 in) or 1118 mm (44 in)
Roll length 91.4 m (300 feet)
Sheet width 210 mm (8.3 in) 610 mm (24 in) or 1118 mm (44 in)
Sheet length 279 mm (11 in) 1676 mm (66 in)
Table 21-3 Printing resolutions
Print quality Maximum
detail Driver Rendering
resolution (ppi) Printing resolution
(dpi)
Best (glossy paper*) On
On
Off
HP-GL/2, HP PCL3
PostScript
Any
1200 Ч 1200
600 Ч 600
600 Ч 600
2400 Ч 1200
2400 Ч 1200
1200 Ч 1200
Best (other papers) Off Any 600 Ч 600 1200 Ч 1200
Normal Off HP-GL/2
PostScript, HP PCL3
600 Ч 600
300 Ч 300
1200 Ч 1200
1200 Ч 1200
Fast Off HP-GL/2
PostScript, HP PCL3
600 Ч 600
300 Ч 300
1200 Ч 1200
1200 Ч 1200
Economode (heavyweight coated
and glossy paper*) Off Any 300 Ч 300 1200 Ч 1200
Economode (other papers) Off Any 300 Ч 300 600 Ч 1200
* For a list of supported glossy papers, see Order paper on page 129 .
Table 21-4 Margins
Top, right and left margins 5 mm (0.2 in)
Bottom margin (trailing edge) 5 mm (0.2 in) (roll)
17 mm (0.67 in) (sheet)
184 Chapter 21 Printer specifications ENWW
Specifications