HP Designjet T1200 Printer series - Manual (Page 22)

Connect to a network (Mac OS)
You can connect your printer to a network under Mac OS X by using the following methods:
● Bonjour/Rendezvous
● TCP/IP
NOTE: The printer does not support AppleTalk.
Before you begin, check your equipment:
● The printer should be set up and on.
● The Ethernet hub or router should be on and functioning correctly.
● All computers on the network should be on and connected to the network.
● The printer should be connected to the network.
Now you can proceed to install the printer software and connect your printer.
Bonjour/Rendezvous connection
1.
Go to your printer's front panel and select the Connectivity menu icon , then Fast Ethernet
or Gigabit Ethernet > View configuration. Note the mDNS service name of your printer.
2. Insert the HP Start-Up Kit CD into your CD drive.
3. Open the CD icon on your desktop.
14 Chapter 2 Installing the software ENWW
Software installation