HP Designjet T1200 Printer series - Manual (Page 24)

TCP/IP connection
1. Go to your printer's front panel and make a note of the printer's URL (see Access the Embedded
Web Server on page 27 ).
2. Insert the HP Start-Up Kit CD into your CD drive.
3. Open the CD icon on your desktop.
4. Open the Mac OS X HP Designjet Installer.
5. Follow the instructions on your screen.
6. The printer software is installed, including the printer driver and the HP Utility.
7. When the software has been installed, the HP Printer Setup Assistant starts automatically, to set
up a connection to your printer. Follow the instructions on your screen.
8. When you reach the Select Printer screen, look for your printer's URL (which you noted in step
1) in the Printer Name column.
● If you find the right printer name, scroll sideways if necessary to see the Connection Type
column, and check that it shows IP Printing. Then highlight that line. Otherwise, continue
searching further down the list.
● If you cannot find your printer name with an IP Printing connection type, check the box My
printer is not in the list.
Click Continue.
16 Chapter 2 Installing the software ENWW
Software installation