HP Designjet T1200 Printer series - Manual (Page 46)

14. If the leading edge of the paper has no barcode, the front panel prompts you to select the paper
category and type.
TIP: If you have loaded a paper type whose name does not appear in the paper list, see The
paper type is not in the driver on page 137 .
15. If the Printing paper info option is enabled, the front panel may ask you to specify the length of
the roll. See
Printing paper info on page 43 .
16. The printer checks the alignment and measures the width, then the front panel prompts you to
close the roll cover.
If the roll is not correctly aligned, follow the instructions on the front-panel display.
NOTE: If you have an unexpected issue at any stage of the paper loading process, see The paper
cannot be loaded successfully on page 136 .
Unload a roll
Before unloading a roll, check whether there is paper on the roll or if the roll is out of paper, and follow
the appropriate procedure as described below.
Quick procedure with paper on the roll (T770 series only)
To unload the roll, press the Unload paper key on the front panel.
Quick procedure with paper on the roll (T1200 series only)
If there is paper on the roll, just open the roll cover, and the roll is unloaded automatically.
NOTE: When the roll is unloaded in this way, no barcode is printed on it, so the printer will not know
the length of the roll when it is next loaded. See Printing paper info on page 43 .
NOTE: If you open the cover of roll 1 while a sheet is loaded, the sheet is also unloaded.
Paper menu procedure with paper on the roll
If there is paper on the roll, you can unload it from the front panel.
1.
Select the Paper menu icon .
38 Chapter 5 Paper handling ENWW
Paper handling