HP Designjet T1200 Printer series - Manual (Page 60)

NOTE: The paper size specified here should be the paper size in which the document was created.
It is possible to rescale the document to a different size for printing. See Rescale a print
on page 55 .
● In the Windows driver dialog: select the Paper/Quality tab, then select your paper size from
the Document Size list.
● In the Mac OS Page Setup dialog: select your printer from the Format for list, then select your
paper size from the Paper Size list.
NOTE: If your application offers no Page Setup dialog, please use the Print dialog.
● On the Embedded Web Server's Submit Job page (T1200 series): select Advanced
settings > Paper > Page size > Standard.
●
Using the front panel: select the Setup menu icon , then Printing preferences > Paper
options > Select paper size.
NOTE: If the paper size is set from your computer, it overrides the paper size setting in the
front panel.
Custom paper sizes
To choose a non-standard paper size not shown in the list of paper sizes:
● Under Windows, there are two different ways:
◦ In the driver dialog, click the Custom button in the Paper/Quality tab, then specify the
name and the dimensions of your new paper size, then click Save to save your new paper
size. To see your new custom size in the list of custom sizes, you need to exit the printer
properties, then reenter them (and use the More button if necessary).
NOTE: The driver will not allow you to create a paper size whose width exceeds its
length.
◦ From the Start menu, select Printers and Faxes, then from the File menu select Server
Properties. In the Forms tab, check the Create a new form box, specify the name and
dimensions of the new form, then click Save Form.
● Under Mac OS: select Paper Size > Manage Custom Sizes in the Page Setup dialog.
NOTE: If your application offers no Page Setup dialog, please use the Print dialog.
● On the Embedded Web Server's Submit Job page (T1200 series): select Advanced
settings > Paper > Page size > Custom.
Select margins options
By default, the printer leaves a 5 mm margin between the edges of your image and the edges of the
paper (increased to 17 mm at the foot of cut-sheet paper). However, you can change this behavior in
several ways.
● In the Windows driver dialog: select the Paper/Quality tab and then the Margins/Layout
button.
● In the Mac OS Print dialog (T770, T1200): select the Margins/Layout panel.
● In the Mac OS X 10.5 or 10.6 PostScript Print dialog (PostScript printers): select the
Margins/Layout panel.
52 Chapter 7 Printing ENWW
Printin
g