HP XP7 Storage - Manual (Page 88)

Procedure 25 To delete a remote path
1. In the Storage Systems tree, click Replications > Remote Connections.
2. In the Remote Connections window, click the Connections (To) tab.
3. In the Connections (To) tab, select the remote connection with the path to be deleted.
4. From the Actions menu, click Remote Connections > Remove Remote Paths.
5. In the Remove Remote Paths window, click Remove for the remote paths to be removed. Note
that remote paths become unselectable when the minimum number of paths is reached.
6. Click Finish.
7. In the Confirm window, review the settings and enter a task name in the Task Name box.
8. Click Apply to save your settings in the system.
Adding, removing SSIDs on the secondary system
When new LDEVs are added to the secondary system, you make them available for Cnt Ac-S Z
operations by adding the associated SSIDs.
When an LDEV is deleted from the secondary system, delete the associated SSID from the system
to avoid mis-operation.
Prerequisite information
•
You can add four SSIDs to each secondary system.
•
Before adding an SSID, make sure that the remote path is properly installed.
•
SSIDs cannot be added when the remote connection is added by System.
•
Before deleting an SSID, make sure that the remaining SSIDs are still valid, otherwise the
remote paths will be lost.
Procedure 26 To add SSIDs
1. In the Storage Systems tree, click Replications > Remote Connections.
2. In the Remote Connections window, click the Connections (To) tab.
3. In the Connections (To) tab, select the remote connection where you want to add an SSID.
4. From the Actions menu, click Remote Connections > Add SSIDs.
5. In the Add SSIDs window, for SSID, enter the SSID. The range of values is from 0004 to FFFE.
88 Monitoring and maintaining the Cnt Ac-S Z system