HP CM8000 Color Multifunction Printer series - Manual (Page 27)

Capacity of each tray and bin
To avoid jams and print-quality problems, load the trays with the correct amount of paper. Load complete
reams at one time.
Remove paper from the output bins when they are full.
Table 1-6 Capacity of each tray and bin
Tray or bin Capacity Weight
Scanner glass One sheet of paper, up to 305 x 445 mm
(12 x 17.1 inches)
Maximum scanning area is 297 x 433 mm
(11.7 x 17.0 inches)
Any weight of paper
Objects, such as books, up to 50 mm
(1.97 inches) high
Document feeder 100 sheets of paper, 75 g/m 2 (20 lb bond) 60 to 135 g/m 2 (16 to 36 lb bond)
Tray 1 80 sheets of paper, 75 g/m 2 (20 lb bond) 60 to 220 g/m 2 (16 to 58 lb bond)
Trays 2, 3, and 4 500 sheets of paper, 75 g/m 2 (20 lb bond) 60 to 180 g/m 2 (16 to 48 lb bond)
Tray 5 4,000 sheets of paper, 75 g/m 2 (20 lb bond)
Letter or A4 size only
60 to 180 g/m 2 (16 to 48 lb bond)
Single output bin 250 sheets of paper, 75 g/m 2 (20 lb bond) 60 to 220 g/m 2 (16 to 58 lb bond)
HP Multifunction Finisher Output Bins 1 and 2: 400 sheets
Output Bins 3 and 4: 200 sheets
Output Bin 5: 2,500 sheets
60 to 220 g/m 2 (16 to 58 lb bond)
HP 4-Bin Job Separator Output Bins 1 and 2: 400 sheets
Output Bins 3 and 4: 200 sheets
60 to 220 g/m 2 (16 to 58 lb bond)
Supported paper sizes for each bin
Table 1-7 Supported paper sizes for each bin
Bin Length Width
Output Bins 1, 2, 3, and 4 457 to 152 mm (18 to 6 inches) 320 to 102 mm (12.6 to 4 inches)
Output Bin 5
(HP Multifunction Finisher only)
432 to 230 mm (17 to 9.1 inches) 297 to 182 mm (11.7 to 7.2 inches)
ENWW Supported paper 19