HP vs19x 19 inch LCD Monitor - Manual (Page 21)

User’s Guide 3–1
3
Setting Up the Monitor
Before You Begin
1. Unpack the monitor. Make sure all contents are included. Store
the boxes.
2. Turn off the computer, and other attached devices.
3. Determine the video cable or cables that you will connect from
the computer video card outputs to the VGA and DVI-D (select
f monitors only) inputs on the monitor. The vs monitor supports
only VGA. For the f monitor, you can connect one or both
cables.
❏ VGA cable:
Standard VGA 15-pin cable.
❏ DVI-D cable:
For digital operation, use a DVI-D-to-DVI-D video cable
(sold separately). The DVI-D connector on the f monitor is
for digital-to-digital connection only. Your computer must
have a DVI-compatible graphics card installed for use with
this cable.
4. Determine whether the monitor will be desktop-mounted or
wall-mounted.
❏ See “Installing the Monitor.”
5. Prepare a flat area to use when assembling the monitor. You
may need a flat, soft, protected area for placing the monitor
screen-down while preparing it for wall-mounting.
6. You need a Phillips-head screwdriver for preparing the monitor
for wall-mounting. You may need a straight-slot screwdriver to
secure some cables.