HP vs19x 19 inch LCD Monitor - Manual (Page 39)

Setting Up the Monitor
User’s Guide 3–19
Connecting the Power Cable
1. Read the warning below.
Å
WARNING: To reduce the risk of electric shock or damage to your
equipment:
Do not disable the power cord grounding plug. The grounding plug
is an important safety feature. Plug the power cord into a grounded
(earthed) electrical outlet.
Be sure that the grounded power outlet you plug the power cord into
is easily accessible to the operator and located as close to the
equipment as possible. A power cord should be routed so that it is
not likely to be walked on or pinched by items placed upon it or
against it.
Do not place anything on power cords or cables. Arrange them so
that no one may accidentally step on or trip over them. Do not pull
on a cord or cable.
See “Power Cord Set Requirements” in Appendix B for additional
information.
2. Connect one end of the power cable to the monitor 5 and the
other end to an electrical wall outlet.
3. For the f monitor, place the cables through the cable
managment clasp 6 at the back of the monitor base.
Item Description
3 Speaker audio cable at computer connector
4 Speaker DC power connector and DC power
cable w (connects to right speaker DC power q
connector)
8 Right speaker with Control knob 9, and
connectors for subwoofer - and speaker
DC power q
Not shown Headphone connector (right speaker)