HP XP Business Copy Software - Manual (Page 51)

Business Copy XP user guide for the XP10000/XP12000 51
• Reserve: X(Y)/Z, where:
X = total number of BC reserved volumes
Y = total number of BC and ShadowImage for z/OS reserved volumes
Z = maximum number of reserved volumes that can be created in one array (BC/ShadowImage for
z/OS /Auto LUN XP/Flex Copy)
NOTE: The value (Y) does not include Auto LUN XP, Flex Copy, Snapshot XP, Hitachi FlashCopy
Mirroring, or Hitachi FlashCopy Mirroring Version 2 pairs. If these pairs exist, the BC paircreate
operation may fail even when (Y) is less than 8,191.
• Use the Display Filter button to filter volumes displayed in the Volume list.
• The Previous button returns to the previous page of the Volume list. This button is available only when
the number of volumes defined in the disk array exceeds 1,024, which is the maximum number of
volumes that can be displayed on one page. The button is unavailable if the total number of defined
volumes is less than 1,024.
• The Next button displays the next page of the Volume list. This button is available only when the
number of volumes defined in the disk array exceeds 1,024, which is the maximum number of volumes
that can be displayed on one page. The button is unavailable if the total number of defined volumes is
less than 1,024.
• The Apply button performs BC operations displayed in the Preset Volume list in the disk array. If the
specified operations complete successfully, the Preset Volume list is cleared. If an error occurs during an
operation, the failed operation remains in the Preset Volume list. To display the error code and
message for the failed operation, select the Detail command.
• The Cancel button cancels all operations specified on the Display tab.
To perform BC operations for volumes, select one or more volumes in the Volume list, right-click, and select
the command (see ” Volume list ” on page 51 and Table 23 ).
For more information about the History and Option tabs of the BC main screen see ” Viewing BC pair status
and history ” on page 71 and ” Setting BC options ” on page 73. For information about the Snapshot XP
tab, see the HP StorageWorks Snapshot XP user guide.
Volume list
The Volume list ( Figure 27 ) displays volume/pair information based on filter options selected in the Tree
View box (along the left side of the screen).
NOTE: You can select up to 512 volumes/pairs in the Volume list.
NOTE: The maximum number of volumes displayed in the Volume List is 1,024. If the number of volumes
defined in the disk array exceeds this limit, use the Previous and Next buttons on the upper right of the
Volume list to turn the pages of the Volume list to see the entire list.
Figure 27 Volume list
The Volume list contains all installed volumes (LUs) on the selected port and displays the following
information for each volume: