HP Hitachi Dynamic Link Manager Software - Manual (Page 341)

3. Creating an HDLM Environment
317
pci-0000:20:01.0-scsi-0:0
:1:0-part2 disk/by-uuid/
c230c70d-1b18-4d95-b50a-31edb3bd038c
In the execution result,
disk/by-id/
scsi-2000c50fffecb6ae0-part2
indicates the device name (
udev
name) that corresponds to
/dev/sda2
.
To specify the device name (
udev
name) in the
/dev/disk
directory
instead of the SCSI device, replace the SCSI device (
/dev/sda2
) checked
in step 3 with
/dev/disk/by-id/scsi-2000c50fffecb6ae0-part2
.
If LVM2 is not used, go to step 7.
6. When LVM2 is used, edit the
/etc/lvm/lvm.conf
file so that the LVM2
recognizes the SCSI device, not the HDLM device.
Figure 3-43: Example of Editing /etc/lvm/lvm.conf file show examples of editing
the
/etc/lvm/lvm.conf
file.
Figure 3-43: Example of Editing /etc/lvm/lvm.conf file
Comment out the existing
filter
and
types
lines, and add the shaded lines in
the figure.
In addition, set
md_component_detection
to its original value before