HP ProLiant DL360 G7 Server - Manual (Page 23)

Operations 23
c. Lift the assembly to unseat the PCI riser boards, and then remove the assembly.
Install the PCI riser board assembly
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser board assembly.
1. Align the PCI riser boards with the corresponding connectors on the system board, and then install the
assembly.
2. Tighten the four PCI riser board assembly thumbscrews.
3. Install the air baffle (on page 21 ).
4. If removed, install the BBWC battery pack or the FBWC capacitor pack (" Installing the BBWC battery
pack or the FBWC capacitor pack " on page 57 ).
5. Install the access panel (on page 20 ).