HP ProLiant DL360 G7 Server - Manual (Page 52)

Hardware options installation 52
3. Remove the access panel (on page 20 ).
4. Remove the hard drives from bays 1 and 2.
5. Remove the hard drive bezel blanks from hard drive bays 5 and 6 (" Removing hard drive bezel blanks "
on page 46 ).
6. Remove the dual hard drive bezel blank (" Removing the dual hard drive bezel blank " on page 47 ).
7. Install the hard drive cage.
8. If installed, remove the BBWC battery pack or the FBWC capacitor pack (on page 20 ).
9. Remove the air baffle (on page 21 ).
10. Remove the fan blank.