HP StorageWorks XP Remote Web Console Software - Manual (Page 20)

Description Item
When a storage logical partition is selected the Partition Definition tree, the Storage Logical
Partition resource list shows resource information, including logical partitions and ports, for the
selected storage logical partitions cache.
If SLPR 0 is selected in the Storage Logical Partition tree, this list shows all resources not
specifically assigned to another SLPR.
The list provides the following information:
• No.: The line number
• Resource Type: The resource type, including Cache Partition or Port (type)
• Name: The resource name
• If the resource type is Cache Partition, the CLPR number and name are displayed.
• If the resource type is Port, the port name displays.
• Properties: The capacity and number of parity groups allocated to the selected cache logical
partition
• Information: If the resource is a port, this is the channel adapter name.
Storage
logical
partition
resource list
The settings of the selected storage logical partition. See “ Creating a Storage Logical
Partition ” on page 29 for more information on storage logical partition operations.
If the storage partition administrator wants to use the Virtual LVI/LUN (VLL) function, the CU
numbers and SSIDs must have previously been specified for each storage logical partition, so
that newly allocated CU numbers and SSIDs will not overlap those in another storage logical
partition. For more information on Virtual LVI/LUN, see the HP StorageWorks
XP24000/XP20000 Virtual LVI/LUN (VLL) and Volume Shredder User's Guide.
• SLPR Name: The name of the storage logical partition, up to 32 alphanumeric characters.
This field allows you to set or change the name of the storage logical partition, provided
that it is within the selected CU.
• CU (*: SSID assigned): The LDKC and CU number of the specified SLPR (00 to FE). An asterisk
(*) indicates that the SSIDs are assigned to the CU. To delete a CU from the specified SLPR,
select that CU from this list and click Delete to return the CU to the Available CU list.
• Available CU (* SSID assigned):
• LDKC:CU: the LDKC and CU numbers. An asterisk (*) indicates that the SSIDs are assigned
to the CU.
• SLPR: Displays the SLPR for that CU
• SSID (SLPR): If the SSID is assigned to the CU, it displays here. The SLPR for that SSID
displays to the right.
• SSID (* CU assigned): This is the SSIDs in the selected storage logical partition (0004 to
FFFE). An asterisk (*) indicates that the SSID is assigned to a CU. You can select up to 510
CUs that do not have SSIDs assigned and/or CUs that have SSIDs assigned.
If a customized volume (CV) is set by using Virtual LVI/LUN, and the CU No. and SSID are
registered to different storage logical partition, a dash (-) displays to the right of the SSID
number. For more information on the VLL function, see the HP StorageWorks
XP24000/XP20000 Virtual LVI/LUN (VLL) and Volume Shredder User's Guide.
• From The starting number of the SSID that is added (0004 to FFFE). This number must be
smaller than the number that is entered into the To field.
• To The ending number of the SSID that is added (0004 to FFFE). You may enter up to 2040
SSIDs from SLPR 0.
To add one or more SSIDs to the SLPR, enter the starting number into the From: field, and
the last number into the To then click Add. To delete an SSID from the SSID box, select that
SSID and click Delete.
Detail for
SLPR
Implements the settings that were made in this window Apply
Using the XP Disk/Cache Partition GUI 20