HP StorageWorks XP Remote Web Console Software - Manual (Page 22)

Description Item
All of the storage logical partitions and cache logical partitions in the storage system. The
storage logical partition number and name are displayed to the right of the each SLPR icon
( ). The cache logical partition number and name are displayed to the right of the CLPR icon
( ).
Partition
Definition
tree
When a CLPR is selected in the Partition Definition tree, the Cache Logical Partition resource
list show the resource information for the selected CU and CLPR.
If CLPR 0 is selected in the Cache Logical Partition tree, this list shows all resources not already
assigned to other partitions.
The list provides the following information:
• No. The row number
• Resource Type Type of resources of CLPR.Parity Group is displayed in this column
• Address
An address beginning with the letter E (for example, E1-1) indicates that the parity group
contains external volumes.
An address beginning with M (for example, M1–1) indicates that the parity group contains
migration volumes.
An address beginning with the letter V (for example, V1-1) indicates that the parity group
contains HP StorageWorks XP Snapshot virtual volumes.
An address beginning with the letter X (for example, X1-1) indicates that the parity group
contains HP StorageWorks XP Thin Provisioning Software virtual volumes.
• Properties
If a parity group contains internal volumes, the parity group and RAID configuration are
displayed.
If a parity group contains external volumes, the volume capacity is displayed, but the RAID
configuration is not displayed.
If a parity group contains virtual volumes (for example, XP Snapshot or XP Thin Provisioning),
the volume capacity is displayed, but the RAID configuration is not displayed.
• Emulation Emulation type of the parity group
Cache Logic-
al Partition
Resource List
Using the XP Disk/Cache Partition GUI 22