Calling hp technical support – HP StorageWorks XP Remote Web Console Software User Manual
Page 36
Corrective Action
Error
•
LUs in parity groups must remain within the same SLPR.
When you attempt to migrate a parity
group to a CLPR in another SLPR, an LU
warning message is displayed.
•
LUs in parity groups must remain within the same SLPR.
When you attempt to migrate a CLPR to
another SLPR or deleted that CLPR, an LU
warning message is displayed.
LUs that are associated with a port in a particular SLPR must
stay within that SLPR.
When you attempt to migrate a port to
another SLPR, an LU warning message is
displayed.
LUSE volumes cannot be set across more than one CLPR.
When you attempt to migrate a parity
group to another CLPR, an LU warning
message is displayed.
You are trying to allocate ports in a port block in High Speed
mode to more than one SLPR. Check the port settings and
make sure that all ports in the port block belong to the same
SLPR.
When the port in an SLPR migrates to
another SLPR, a warning message is
displayed.
You cannot assign the same name to more than one SLPR.
The name you entered is already being used. Enter another
name.
The SLPR name cannot be changed.
You cannot assign the same name to more than one CLPR.
The name you entered is already being used or is reserved
by a system. Enter another name.
The CLPR name cannot be changed.
•
Make sure that all concatenated parity groups belong to
the same CLPR.
•
Make sure to click the Apply button when creating a new
CLPR.
The parity group in a CLPR cannot migrate
to another CLPR.
Calling HP Technical Support
If you need to call HP technical support, make sure to provide as much information about the problem
as possible, including:
•
The circumstances surrounding the error or failure
•
The exact content of any error messages displayed on the host systems(s)
•
The exact content of any error messages displayed by XP Remote Web Console
•
The XP Remote Web Console configuration information (use the FD Dump Tool)
•
The service information messages (SIMs), including reference codes and severity levels, displayed
by XP Remote Web Console
For worldwide technical support information, see the HP support website:
Troubleshooting
36