Removing dimms – HP Netserver E Server series User Manual
Page 38
Advertising
Chapter 4
Installing Additional Memory
32
System Board
0
1
2
3
Figure 4-4. DIMM Insertion
12. Repeat to install all of the DIMMs for your memory configuration.
Removing DIMMs
You may need to remove a DIMM module to downsize your memory
configuration or to replace a defective DIMM.
1. If the system is already installed and working, power down the system.
Refer to Chapter 1, "Controls, Ports, and Indicators."
2. Disconnect the power cables and all external cables.
If necessary, label each one to support re-assembly.
WARNING
The power supply will continue to provide standby current to
the NetServer until the power cable is disconnected.
Advertising