HP StoreEver DAT Tape Drives - Manual (Page 53)

4. The LEDs will flash in OBDR mode (as described in step 2) while the tape drive restores your
operating system to a state where it can run a normal data restore.
5. Once the operating system has been set up and rebooted, the Tape LED display on the tape drive
changes to constant green and you can remove the backup cartridge, if you wish. You are now
ready to run a normal data restore. Follow the normal process for your restore application.
If restore fails
If the restore fails for any reason, refer to our World Wide Web site ( http://www.hp.com/go/obdr )
and do a search on OBDR for detailed troubleshooting information.
DAT SCSI Tape Drives 53