HP VMA-series Memory Arrays - Manual (Page 117)

AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 117
At that point, pressing Tab again displays a list of possible completions, which
might be keywords or values, or both.
For a list of all commands currently available, press the Tab key twice at the
prompt.
In Standard mode, for example, press the Tab key twice to list these commands:
Command Modes
The CLI can be in one of three modes, which determine the set of commands that
can be executed. Commands that are not currently available do not show in help or
completion, and generally behave as if they do not exist.
Standard Mode
When the CLI is launched, it begins in Standard mode. This is the most restrictive
mode and only has commands to query a restricted set of state information. In this
mode you cannot take any actions that would directly affect the system, nor can you
change any configuration.
User accounts with the unpriv role are restricted to Standard mode.
h<tab> Completes the help keyword.
sh<tab> Completes the show keyword (but s<tab> does not,
because more than one command starts with the letter
“s”).
show <tab> Lists options of the show command that can immediately
follow the
show keyword.
sh<tab><tab> Completes the show keyword and lists options of the
show command.
s<tab><tab> Lists all available commands that begin with the letter
"s".
> <tab><tab>
cli help show terminal
enable no slogin traceroute
exit ping telnet