Vshare block storage management commands, Managing containers, Managing initiator groups – HP VMA-series Memory Arrays User Manual
Page 102: Managing luns
102
AM456-9007B Rev 02
HP VMA SAN Gateway Installation and User Guide
vSHARE Block Storage Management Commands
Managing Containers
The
show containers
command returns information about the storage
containers on an HP VMA SAN Gateway cluster including the node, container
name, the number of LUNs, the space allocated, and the space free.
Managing Initiator Groups
igroup Create Command
[no] igroup create name <name> initiators [initiator_name ..]
The
igroup create
command creates an initiator group and, optionally, one or
more Fibre Channel initiators. Fibre Channel initiator identifiers (WWNs) are
generated automatically by an HBA.
igroup addto Commands
[no] igroup addto <igroup name> initiators [initiator_name …]
The
igroup addto
command adds one or more initiators to a group.
Managing LUNs
Show LUNs Command
show luns [container] [name <name>] [sessions]
The show luns command enables you to view LUNs. LUNs may be filtered by
container
,
name
, and
session
option.
# show containers
Container LUNs Total Free Ports HostnameA HostnameB Status
---------------------------------------------------------------------------
C-1 0 199G 199G A,B <hostname> <hostname> Single
C-2 150 199G 50176M A,B <hostname> <hostname> Single