HP VMA-series Memory Arrays - Manual (Page 172)

172 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
igroup addto Commands
[no] igroup addto <igroup name> initiators [initiator_name …]
The igroup addto command adds one or more initiators to a group.
LUNs
Show LUNs Command
show luns container name sessions
The show luns command enables you to view LUNs. LUNs may be filtered by
container , name , and session parameters. To view a list of containers, enter
show luns container ? . The name parameter enables you to view only those
LUNs which are prefixed by a particular name.
LUN Create Commands
[no] lun create container <container_name> name <LUN_name>
size [<size GB> | equal] [quantity <number>] [nozero]
[readonly] [startnum <unsigned integer>] [blocksize 512 |
4096] [offline]
The lun create command enables you to create a LUN within a specified
storage container.
LUN Set Commands
[no] lun set container <id> name <name> readonly
The lun set command enables you to set a LUN as read-only. The lun set
command is the only command usable after a LUN has been created except the no
lun create … readonly command.
Targets
Show Targets Command
show targets [node <cluster node id>] [hostname <hostname>]
[protocol fc] [id <target id>] [sessions] [detail]