HP Integrity NonStop H-Series - Manual (Page 65)

Figure 20 Network Connections preferences page
2. In the preference page, select Add/Remove...
3. In the Add or Remove Connection Configurations dialog ( Figure 21 (page 65) ), type in an IP
address or a system name in the System: field and click the Add button.
TIP: If you have already configured one or more remote connections and you want to reuse
the settings from an existing configuration, select it in the list of connection configurations,
then select Copy, and then OK. As a result, the System combo will contain a copy of the system
name you selected and the User name: field will be empty, and your preferred protocol and
settings will be identical to the configuration you copied. You can then (optionally) alter the
name of the system and add a user name.
Figure 21 Add or Remove Connection Configurations dialog
4. Select OK to dismiss the Add or Remove Connection Configurations dialog. The system or IP
address you typed in will appear in the System: combo box.
TIP: If this is the very first connection you are configuring, you could have simply typed the
system name in the System: combo; but you must select Add/Remove... to add additional
systems.
Configuring connections to NonStop 65