HP IO Accelerator for BladeSystem c-Class - Manual (Page 43)

Utilities 43
This utility captures the current state of the device. When a performance or stability problem occurs with the
device, run the fio-bugreport utility and contact HP support (
http://www.hp.com/support ) for
assistance in troubleshooting.
fio-bugreport runs several information-gathering utilities and combines the resulting data into a text file.
The results are saved in the utils directory (default installation path is C:\Program Files\HP IO
Accelerator\Utils\) in a .cab file that indicates the date and time the utility was run.
NOTE: If the utility recommends that you contact Fusion-io support, disregard that message and
contact HP support ( http://www.hp.com/support ) instead.
Syntax
fio-bugreport
Sample output
C:\Users\<username>"\Program Files\HP IO Accelerator\Utils\fio-bugreport.exe"
Generating bug report. Please wait, this may take a while...
---------------------------------------------
Gathering all Windows Event Logs...DONE
Gathering Fusion-io Windows Event Logs...DONE
Gathering System Information...DONE
Running fio utilities...DONE
Compressing to CAB file...DONE
Bug report has successfully been created:
fio-bugreport-20100222_192621.cab.
Please e-mail this file to HP support
For example, a bug report file named fiobugreport-20090921.192621.cab indicates the following:
• Date (20090921)
• Time (192621, or 19:26:21)
fio-config
Description
Sets and gets configuration parameters for device operation. For a list of parameters, see "fio-config options
(on page 44 )."
Syntax
fio-config <device> [options]
where <device> is the name given to the IO Accelerator during the installation process. The syntax is
/dev/fctx, where x indicates the PCIe bus number where you installed the IO Accelerator. For example,
the name /dev/fct4 refers to the IO Accelerator device installed in PCIe Bus 4 in your Windows®
operating system. Use the IO Accelerator Management Tool or fio-status to view this bus number.
Options