HP Hitachi Dynamic Link Manager Software Licenses User Manual
Page 611
Message ID
Message Text
Explanation
then execute the dlmcfgmgr
utility again.
information on a HDLM device
could not be released.
Action
Stop the application for using
HDLM device, and unmount the
mounting HDLM device, and re-
execute the dlmcfgmgr utility. For
details on the dlmcfgmgr utility,
Managing the HDLM Configuration
KAPL10356-E
An unused major number could
not be released. Major number
= aa...aa. Refer to the Messages
section of the HDLM User's
Guide for instructions to correct
this problem.
Details
An attempt to release an intact
major number (aa...aa) has failed.
aa...aa: Major number (decimal
number)
Action
Restart the host. If the host does
not recover, execute the
DLMgetras utility for collecting
HDLM error information, and then
contact your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
For details on the DLMgetras
utility, see
Collecting HDLM Error Information
KAPL10357-E
The maximum number of HDLM
device files has been reached.
Maximum number = aa...aa.
Modify the configuration of the
HDLM device to reduce the
number of HDLM devices used,
and then execute the dlmcfgmgr
utility again.
Details
An attempt to execute the HDLM-
configuration definition utility
(dlmcfgmgr) failed because the
maximum number of logical
device files has been created.
aa...aa: Maximum number of
created logical device files of an
HDLM device (decimal number)
Action
Revise the configuration of the
HDLM device to reduce the
number of HDLM devices used,
and then re-execute the
dlmcfgmgr utility. For details on
the dlmcfgmgr utility, see
dlmcfgmgr Utility for Managing
the HDLM Configuration on page
.
KAPL10358-E
The device name is too long.
Maximum length = aa...aa.
Check that the logical device file
name of the HDLM device is
Details
An attempt to execute the HDLM-
configuration definition utility
(dlmcfgmgr) failed because the
Messages
8-99
Hitachi Dynamic Link Manager (for Linux®) User Guide