HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 171)

¢
HDLM information is missing in the /etc/init.d/boot.localfs file,
the /etc/init.d/boot.md file, or the /etc/init.d/lvm2 file.
Confirm that the HDLM information is missing by executing the
following commands:
# grep Required-Start /etc/init.d/boot.localfs
# grep Required-Start /etc/init.d/boot.md
# grep Required-Start /etc/init.d/boot.lvm
If the information in boot.hdlm is not output after command
execution, HDLM information is missing.
For details about the dlmupdatesysinit utility, see dlmupdatesysinit
Utility for Updating System Scripts on page 7-41 .
• HDLM and the Device-Mapper multipath function cannot be used
together.
You can check whether the Device-Mapper multipath function is enabled
by checking whether device-mapper-multipath is installed and
multipath devices are enabled.
Disable multipath devices if device-mapper-multipath is installed and if
multipath devices are enabled. For details on how to disable multipath
devices, see the device-mapper-multipath documentation. The
examples below show how to check whether device-mapper-multipath
is installed and whether multipath devices are enabled.
¢
If multipath devices are enabled:
# rpm -q device-mapper-multipath
device-mapper-multipath-0.4.9-46.el6.i686
#
# /sbin/multipath -l
mpathc (360060e801082eea004d4252a000000c6) dm-3 HITACHI,DF600F
size=1.0G features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=0 status=active
| |- 2:0:1:2 sdm 8:192 active undef running
| `- 3:0:1:2 sdo 8:224 active undef running
`-+- policy='round-robin 0' prio=0 status=enabled
|- 3:0:0:2 sdh 8:112 active undef running
`- 2:0:0:2 sdi 8:128 active undef running
:
:
¢
If multipath devices are disabled:
If you execute the /sbin/multipath -l command, no information
appears.
# /sbin/multipath -l
#
Notes on Installing HDLM
• A license key is required to perform a new installation of HDLM.
To update the HDLM license, execute the dlnkmgr command's set -lic
operation. The expiration time of the license key is determined by the
type of license key specified in the license key file or entered by the user.
Creating an HDLM Environment
3-99
Hitachi Dynamic Link Manager (for Linux®) User Guide