Binding margin is in the wrong place, Dimensions when attached to printer, Duplexing specifications – HP Deskjet 6840 Color Inkjet Printer User Manual
Page 162
Paper size changes when the two-sided printing option is selected
The paper size is not supported by the
.
Binding margin is in the wrong place
You might have chosen an incorrect paper orientation.
1. Open the
dialog box.
2. Select the Two-Sided Printing panel.
3. Verify that the correct binding has been selected:
• The Book button is selected for binding along the side.
• The Tablet button is selected for binding along the top.
Only one side of the page prints when the two-sided printing option is
enabled
Verify the following:
• The
are set in both the printer software and the application
you are using.
• The photo paper is not curled, if you are printing on two-sided photo paper.
Photo paper should be flat before printing. See
for more information.
• The paper size selected in the
dialog box is supported by the
duplexer.
• The paper type selected in the Paper Type/Quality panel is supported by the
duplexer.
See the documentation that came with the duplexer for a list of supported paper
types and sizes.
12.3.6 Auto Two-Sided Print Accessory with Small Paper Tray
specifications
Dimensions when attached to printer
219.3 mm (8.63 in) tall x 320.5 mm (12.62 in) wide x 142.1 mm (5.6 in) deep
Duplexing specifications
For duplexing specifications, including skew, media weight, and media sizes for
paper fed into the printer through the printer In tray, see the
Printing Accessory specifications
HP Deskjet 6800 series printer User's Guide
162