HP Deskjet 6840 Color Inkjet Printer User Manual
Page 52
2. Verify that the printer is powered on.
3. Connect the
to an available port on the network
.
Note: Do not plug the Ethernet cable into a port labeled WAN or Uplink.
4. Connect the Ethernet cable to the Ethernet port on the back of the printer.
Note: The printer's wireless radio is disabled when a Ethernet cable is
connected to the printer.
5. Do one of the following:
State of the Link light Task
On
Go to step 6.
Off
Repeat steps
. If the lights are still off, then
verify the following items:
• The printer is powered on.
• The network
or
is powered on.
• All cable connections are secure.
• You are using an
.
6.
.
7. Install the
on each computer that will use the printer.
Caution: It is recommended that the printer and the computers that use it be
on the same subnet. Printer installation across subnets can be problematic
depending on the type of router used.
HP Deskjet 6800 series printer User's Guide
52